Best Pink PC Cases in 2024

Spread the love

Are you looking for Best Pink PC Cases? It is slowly becoming more mainstream to build PCs in pink colors, and pink-colored products are becoming unisex. It is now common for streamers to show off their pink pc case to demonstrate their non-vicious cute gaming setups in live streams. A pink shade can go from being aesthetically pleasing to being downright ugly in a matter of seconds. The manufacturers carefully select the shades and materials to make the whole setup look clean. Once one has chosen a color, one must carefully examine the specs in order to ensure sufficient cable management, good airflow, room for liquid cooler setups, and clearance for air-based CPU coolers. Check our top picks :


Apevia Crusader-F-PK, 60%

Apevia Crusader-F-PK


  • Brand: Apevia
  • Material: Tempered Glass
  • Cooling Method: Air

Golden Field MAGE-P, 60%

Golden Field MAGE-P


  • Material: Tempered Glass
  • Cooling Method: Water, Air

Apevia Predator-PK 60%

Apevia Predator-PK


  • Brand: Apevia
  • Material: Metal
  • Cooling Method: Air

Gaming frame drops can be caused by inadequate airflow. It is essential for any online gamer to have smooth, constant frame rates without thermal throttling. Connectivity on the front panel is always one of the most appreciated features of any PC case. You can browse our selection of pink PC cases below. Gaming communities and videographers have gained a great deal of respect from these manufacturers. Our review discusses each PC case in depth in order to determine whether they are worth buying as well as their potential drawbacks. Let’s begin with a few tips:

Quick Shopping Tips for Best Pink PC Cases

Front Panel: Ease of access is determined by the front panel. Unless you are a reviewer with a test bench, most users do not use the rear IO panel of the motherboard. In addition to the headphone and microphone jacks, there should be a power button, reset switch, and thorough USB connectivity on the front panel. All this will make your day-to-day work easier and more productive.

Air Flow: Your PC’s performance depends on airflow. There are several problems caused by low airflow, including thermal throttling, performance degradation, bottlenecks, and equipment failures. It is important to carefully evaluate the airflow direction and options for improving airflow. Moreover, it is important to examine the possibility of bringing cooling solutions on site.

Material: A frame made from the right materials will be strong, and the window will be transparent and not prone to scratches. Manufacturers of PC cases often use higher gauge sheet metals, which result in a lighter case, but a wobbly structure. It has been ensured that the products listed meet the minimum criteria for not being flimsy.

Clearances: It is imperative that a PC chassis be able to hold a large graphics card, a big air-based CPU cooler, a PSU, a radiator and reservoir for liquid cooling, as well as many cooling fans. Installing these components without enough clearance might result in severe incompatibility issues, and you may be forced to replace your computer case to fit your components.

Best Pink PC Cases for Your Pink Computer RIG at a glance:

  1. Best Overall Pink PC Case – Apevia Crusader-F-PK
  2. Best Runner-Up Pink PC Case – Golden Field MAGE-P
  3. Best Pink Mid-Tower PC Case – Apevia Predator-PK
  4. Best RGB-Fans Pink PC Case – Apevia Genesis Pro
  5. Best Pink Premium PC Case – InWin A1 Plus
  6. Best Pink Frame PC Case – Apevia Aura-F-PK
  7. Best Pink Micro-ATX Case – Apevia PRODIGY-PK
  8. Best Mini-ITX Pink Case – SilverStone SG13P

The Best Pink PC Cases for Your Pink Computer RIG You Can Buy Today

1. Apevia Crusader-F-PK – Best Overall Pink PC CaseApevia Crusader-F-PK

Apevia Crusader-F-PK has a cartoon character-like appearance. It is the best overall Pink PC Case for the price and features it offers. In this mid-tower chassis, you can find a large grill with RGB fans visible through the mesh on the front, plus tempered glass windows. All the RGB lighting is controlled by a switch on the front panel. There is another RGB fan on the back of the case. There is a cable tucker for the PSU that tucks away all the cables that emerge from the PSU.

With the increasing popularity of USB Type-C ports in smartphones, users can now look for PC cases with Type-C ports on the front. As wireless peripherals become more popular, motherboards with fast charging capabilities tend to be time-saving. 

Users may be disappointed to discover there is no 5.25″ optical drive bay, as they may want to view old DVDs lying around. It does not support SSD mounting brackets, so the amount of storage is limited. However, there is adequate storage capacity available.

If there aren’t any fans to exhaust air, a magnetic dust filter on top of the case prevents dust from entering from the top. 240mm or 360mm water cooling kits can be used. On the other side of the chassis, you can hide the wires from view to make your complete build look neat and tidy. In our opinion, it’s one of the best pink PC chassis available.


Type: Mid Tower | Motherboard Support: ATX / M-ATX / Mini-ITX | Card Length Supported: 350mm | Storage Support: 2 x 3.5″ & 2 x 2.5″ | Included Fans: 4 RGB

  • Magnet top filter
  • A window with tempered glass
  • Mesh front with high airflow
  • Grommets not included
  • No thermometer on the front

You may also love to read: Best CPU Coolers for Ryzen 7 5800X in 2024

2. Golden Field MAGE-P – Best Runner-Up Pink PC CaseGolden Field MAGE-P

Made from 0.77mm SPCC material, the Golden Field MAGE-P is a durable PC case. The Golden Field MAGE-P was named Best Runner-Up Pink PC Case for its durability and quality. Once delivered, the case has not been reported to be deformed. The paint on the surface of the wall is so high-quality that it cannot be scratched without an ax. Our products are guaranteed to arrive in pristine condition if you order from us. Using tempered glass for a sliding door ensures that there are no holes in the panel.

Since Type-C USB is now widely used and is likely to be required by the vast majority of users, we were hoping for a Type-C USB port in this case. The color of the PC case is perfect, as is the shade. The feet are an issue, however. The silver color of the feet may be difficult to get used to unless you place the case on the floor. Due to the static nature of RGB, circulation patterns are not possible right out of the box.

If you can find pink-colored components, the all-pink color is quite attractive. Many manufacturers are now offering pink motherboard heatsinks so they can coordinate with a theme that turns heads. You can use the PSU shroud as a stand to display your favorite cartoon character. In terms of airflow, it is a decent case with good top, bottom, and front air flow.


Type: Mid Tower | Motherboard Support: ATX / M-ATX / Mini-ITX | Card Length Supported: 320mm | Storage Support: 2 x 3.5″/2.5” & 6 x 2.5″ | Included Fans: 3 RGB

  • Tempered glass sliding side door
  • (front, bottom, and top) Metal mesh
  • Cable grommets made from rubber
  • Colors that are static in RGB
  • There is no Type-C USB port

You may also love to read: Best Mouse Bungee for Gaming in 2024

3. Apevia Predator-PK – Best Pink Mid-Tower PC CaseApevia Predator-PK

With its pink and black theme, Apevia Predator-PK is a standout PC case. It has a front panel that includes USB 3.0, HD Audio, power and RGB lighting ports, making it the best pink Mid-Tower PC case. Underneath the front panel, there are fans that are protected by a honeycomb structure. As well as making sure your GPU, RAM, and CPU receive adequate cooling air, it makes sure your hard drive is well ventilated.

Only a partial portion of the PC case is covered with glass on the side panel. As a first step, unscrew the side panel of your PC so that you can access the inside. Installing the radiator in its intended location can be challenging. If you use a 240mm radiator, it will interfere with the front panel wiring or the storage device. Liquid cooling is difficult to manage in this case due to the size of the radiators.

The front panel contains a button that can change the RGB lighting. They have an inner and outer ring that glows homogenously and are made from high-quality material. As a result of the black interior, your PC will be able to utilize all the latest component options.


Type: Mid Tower | Motherboard Support: ATX / M-ATX / Mini-ITX | Card Length Supported: 350mm | Storage Support: 3×3.5″ & 2×2.5″ | Included Fans: 4 RGB

  • The RGB fans are high-quality
  • Honeycombed mesh on the front
  • Removing the front mesh is easy
  • There is no screwless panel opening
  • The whole side panel is not visible

You may also love to read: How Does Vertical Mount GPU Work?

4. Apevia Genesis Pro – Best RGB-Fans Pink PC CaseApevia Genesis Pro

In the case of a pink PC case, Apevia is known for making high-quality PC cases. With pink and black shades, your chassis can easily draw attention to the components inside. Pevia Genesis Pro has tempered glass from 34% of the sides, which contains the perfect mix of colors. The front panel of the case is present on the top, making it easy to connect under the table.

Overclockers should consider this before purchasing this PC case since it doesn’t support a 360mm radiator. Due to the lack of rubber grommets, cable management is even more delicate and unnoticeable. The RGB fans on your motherboard cannot be synchronized with any motherboard software or BIOS since there is no syncing support. RGB is an independent system. Front-panel controls can, however, be used to control the RGB fans.

Although it is a mid-tower PC case with two sections, one for displaying hardware and one for storing clutter, it has a small footprint. There is an offset screw on the top glass window of the Best RGB-Fans Pink PC Case, which allows air to enter from the sides. A 120mm fan can be mounted on top of the case to quickly exhaust hot air. The PSU shroud is designed to keep the heat produced during power supply contained.


Type: Mid Tower | Motherboard Support: ATX / M-ATX / Mini-ITX | Card Length Supported: 350mm | Storage Support: 3 x 3.5″/2.5” & 2 x 2.5″ | Included Fans: 6

  • Six RGB fans pre-installed
  • Two see-through tempered glasses
  • Easy and quick mounting system
  • No front-facing fan controller
  • No support for 360mm radiators

You may also love to read: What CPU to pair with RTX 3080? [Updated]

5. InWin A1 Plus – Best Pink Premium PC CaseInWin A1 Plus

For anyone looking for the best pink premium PC case, the InWin A1 Plus is the best pink mini-ITX motherboard that is also an HTPC. Due to the wireless charging that is incorporated, it has an acrylic top. It is now a must-have feature for handheld devices to be able to charge wirelessly. This beautifully implemented RGB fan ring with the appropriate amount of glow makes it look vicious and alive.

You will appreciate the 320mm length of this PC case if you own a high-end GPU in the RTX 3000 series. All the latest components fit perfectly in this case. A mini-ITX CPU cooler measuring 160mm in height can be installed in this case. The lack of a liquid reservoir prevents custom loops from being implemented. The back of the chassis can be fitted with a 120mm radiator for liquid cooling.

The InWin PC case is, without a doubt, one of the best mini-ITX compatible cases on the market. The RGB sync was made through the use of the Asus Aura, the Gigabyte RGB Fusion, the AsRock Polychrome, and MSI Mystic. The fans are made of high-quality materials. Sometimes you have to remove the side panel because the tightly packed components can get very hot. Simply press two buttons and the side panel comes off.


Type: Mini ITX Tower | Motherboard Support: Mini-ITX | Card Length Supported: 320mm | Storage Support: 2 x 2.5″ | Included Fans: 2

  • RGB synced HTPC
  • Stand with tinted transparency
  • Wireless charging station on top
  • No space for a liquid reservoir
  • Two 2.5″ drive spaces

You may also love to read: What is VRAM, How to Check it, and Can You Increase It?

6. Apevia Aura-F-PK – Best Pink Frame PC CaseApevia Aura-F-PK

For gamers, Apevia Aura-F-PK is the best pink frame PC case with low noise. In addition to two front-facing glass panels, there is also a side-facing one. This case offers maximum visibility for RGB fans and high-performance components. Its front panel has fewer USB ports than other models, and RGB switches are implemented in a subtle manner, and levels function as switches. Two additional buttons are included in Apevia that can be used for other purposes.

Because the case is black from the inside, it cannot be called a pink PC case. However, it is in keeping with most color schemes used in market components. This cooler can support any big CPU cooler that has some overclocking headroom, such as a 165mm CPU. On the front of the PC case, we can see that there are small vents for airflow. 

In turn, the hindrance lowers the noise levels and decreases the flow rate, leading to heating problems.

We recommend users buy this PC case with low-power components and avoid overclocking since it has adequate airflow for high-end PC components. The case is meant to be a quiet PC case, which is ideal for users who use liquid-based cooling. RGB-based fans are included, but they are unable to sync with any motherboard to automatically make the entire setup uniformly lit. However, the included fans are well worth the cost.


Type: Mid Tower | Motherboard Support: ATX / M-ATX / Mini-ITX | Card Length Supported: 350mm | Storage Support: 2 x 3.5″/2.5” & 2 x 2.5″ | Included Fans: 4

  • Tempered glass on all sides
  • Cooler support for 165mm CPUs
  • High air flow and low noise
  • Not a slot for an optical drive
  • Fits 360mm radiators

You may also love to read: Best Graphics Card for 1080p 144Hz in 2024

7. Apevia PRODIGY-PK – Best Pink Micro-ATX CaseApevia PRODIGY-PK

Apevia PRODIGY-PK is a pink PC case designed to meet the needs of gamers who don’t want to put too many cables on their desks while maintaining high airflow. There is a large mesh on the front of the PC case that allows for sufficient cooling of high-power components such as the GPU and CPU. A 350mm graphics card can be housed in the PC case. The RTX 3090, the best graphics card for businesses, is 313mm thick, so any graphics card larger than it can be accommodated.

Among the best pink micro-ATX cases, this case comes with three fans. Nevertheless, some users have complained they do not sync up and do not change colors together. It is always necessary to choose between high airflow and high noise levels. PC cases like this one are intended for HTPCs and contain the components required for high-end gaming PCs.

With 120mm fans and mesh radiators, heat is removed from the top of the case. If you choose to install a liquid cooling system, a 240mm radiator can be installed. Pink is a subtle shade that complements any gaming setup, and its small size makes it ideal for Instagram. To give them a premium appearance, the fans also feature inner and outer RGB rings. The case is reasonably priced.


Type: Micro-ATX Tower | Motherboard Support: M-ATX / Mini-ITX | Card Length Supported: 350mm | Storage Support: 2 x 3.5″/2.5” & 2 x 2.5″ | Included Fans: 3

  • Filter for magnetic dust on top
  • Cable management at its finest
  • Top USB2.0/USB3.0/audio ports
  • Handles not included
  • Noise levels are high

You may also love to read: Best Graphics Cards for Skyrim in 2024

8. SilverStone SG13P – Best Mini-ITX Pink CaseSilverStone SG13P

Silverstone specializes in building small cases. SilverStone SG13P is the perfect horizontal case if you are looking for an easy way to install your motherboard and components. Designed to be compatible with Mini-ITX / Mini-DTX motherboards, this PC case features high airflow to reduce the noise from fans. PC cases do not come with fans, so users can install low noise low-speed fans to operate quietly.

The components of this Best Mini-ITX Pink Case are riveted together, causing them to wobble when assembled and disassembled. The overall feel of the case is sluggish since Sheet Metal is made from a thin material. No dust filter is present on the PSU, and the length of the PSU is only 5.5″. There can be no graphics cards longer than 300mm installed. This case does not support RTX 3000 series GPUs.

With its horizontal design, this PC case prevents GPU sagging from occurring during operation. Sagging GPUs can damage equipment. In order to prevent creeping on PCIe slots, the slots have been reinforced, but all of this could easily be avoided by using a horizontal setup.


Type: Mini-ITX Tower | Motherboard Support: Mini-ITX / Mini-DTX | Storage Support: 240mm | Included Fans: None

  • A standoff escalated
  • Top-down installation design
  • Hard drives up to 3.5″ and 2.5″ are supported
  • No dust filter on the PSU
  • External drives are not supported

You may also love to read: Best Ram for i7 11700k in 2024


Apevia produces the majority of the PC cases that we have reviewed, but we have featured many other PC cases as well. Not because Apevia only offers pink PC cases, but because their designs are the most cost-effective. Construction is done with thicker sheet metal, which is made from high-quality material. You can choose a PC case with a full mesh front design if you want to have good airflow and not worry about noise. Your high-power components will stay cool under normal conditions.

If you want a Best Pink PC Cases, you should install a case with large vents for airflow and a large radiator hole. The radiator-based liquid cooling is perfect for computers with high thermal design power (TDP), so it will keep the noise level low. Your desktop PC case footprint can be selected from a range of sizes according to your budget. Mid-Tower PC configurations that have high flow designs are most common.